() 해외배송 가능
판매가 | |
---|---|
소비자가 | 0원 |
적립금 |
|
무이자할부 | |
제조사 | 자체제작 |
원산지 | |
상품코드 | P0000JMR |
수량 | |
국내/해외배송 | |
SNS 상품홍보 | |
QR코드 | |
QR코드 보내기 |
기존 병렬 데이터 교환 방식이 아닌 I2C 통신 방식으로 문자형 LCD를 조작할 수 있는 상품입니다.
LCD1602 IIC/I2C Module은 Adapter plate를 문자형 LCD모듈에 붙여 판매되고 있는 상품으로써,
아두이노, 라즈베리파이, AVR, PIC, ARM, FPGA 등과의 연결 후 바로 사용할 수 있습니다.
LCD 12C 인터페이스 사용시 2핀 자원만 사용됩니다.
기존 16핀 LCD모듈을 사용하려면 많은 핀을 사용해야 합니다. LCD 12C 인터페이스 변경 후 2핀 자원만 사용됩니다.
보드 사용시 LCD 밝기 조절은 보드 위의 가변저항을 돌려서 맞추시면 됩니다.
Adapter plate의 사용가능 LCD로는 1602, 1604, 2002, 2004 등이 있습니다.
공급전압은 5V이고, 12C 프로토콜을 지원합니다.
● 아두이노와 LCD(+LCD IIC/I2C 인터페이스 보드) 핀 배치
모듈 → 아두이노
GND → GND
VCC → 5V
SDA → A4
SCL → A5
As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires.
If you already has I2C devices in your project, this LCD module actually cost no more resources at all.
It is fantastic for Arduino based project.
Specification:
I2C Address: 0x27
Supply voltage: 5V
the backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
Compatible for 1602 LCD
Pls note that this listing is only for one interface board not including the LCD